40 kW Generator Head 184J - Single Bearing
- PDG INDUSTRIAL 184 J 40KW
- Auxiliary Boost Winding (150% boost of rated power for 5 seconds)
- AVR AS440
- Winding 06 – 4 Wire 1PH / Winding 311 – 12 Wire 3PH
- Class H Insulation
- 60 HZ
- 4 Pole 1800 RPM
- 1.0 Power Factor 1PH / .8 Power Factor 3PH
- Temp Rise/Ambient (125/40)
- Unit Weight: 500lbs.
- Single Bearing (direct connect through SAE bellhousing & flywheel)
- 57HP Diesel engine required for full output, may use engine with less HP but will not produce full output
- 80HP Gas engine required for full output, may use engine with less HP but will not produce full output
These generators are of the synchronous drip proof salient and are very heavy and rugged in construction and easy to maintain. They are built to IEC34, Nema MG1-22, GB755, CSA C22.2-100, VDE 0530 and ASB59 standards. Replaces the following: Stamford, Mecc-Alte, Marathon, Leroy Somer, and Lima Mac.